High-Quality Titanium Strip Manufacturer

Titanium strip

Titanium strip is produced from the titanium sheet. Usually cold-rolled the titanium sheet by a small mill with annealing for several times, then slitting shear to titanium strips according to customer requirements. The advanced equipment, rolling process, process control, annealing temperature and return time control ensured its smoothness and finish, effectively improved the quality of our products.

Grade	Condition	Specification
Gr1, Gr2, Gr4, Gr5, Gr7, Gr9, Gr11,Gr12, Gr16, Gr23	Hot Rolled(R)Cold Rolled(Y)Annealed(M)Solution treatment(ST)	Thickness (mm)	Width (mm)	Length (mm)
Gr1, Gr2, Gr4, Gr5, Gr7, Gr9, Gr11,Gr12, Gr16, Gr23		0.1-2.0	10-500	≥500

Chemical composition test Physical properties test Appearance defects inspection Ultrasonic flaw detection Eddy current testing Macroscopic examination

Grade	Chemical composition, weight percent (%)
Grade	C≤	O≤	N≤	H≤	Fe≤	Al	V	Pb	Ru	Ni	Mo	OtherMax each	OtherMax total
Gr.1	0.08	0.18	0.03	0.015	0.20	-	-	-	-	-	-	0.1	0.4
Gr.2	0.08	0.25	0.03	0.015	0.30	-	-	-	-	-	-	0.1	0.4
Gr.4	0.08	0.25	0.03	0.015	0.30	-	-	-	-	-	-	0.1	0.4
Gr.5	0.08	0.20	0.05	0.015	0.40	5.5-6.75	3.5-4.5	-	-		-	0.1	0.4
Gr.7	0.08	0.25	0.03	0.015	0.30	-	-	0.12-0.25	-	0.12-0.25	-	0.1	0.4
Gr.9	0.08	0.15	0.03	0.015	0.25	2.5- 3.5	2.0- 3.0	-	-	-	-	0.1	0.4
Gr.11	0.08	0.18	0.03	0.15	0.2	-	-	0.12-0.25	-	-	-	0.1	0.4
Gr.12	0.08	0.25	0.03	0.15	0.3	-	-	-	-	0.6- 0.9	0.2-0.4	0.1	0.4
Gr.16	0.08	0.25	0.03	0.15	0.3	-	-	0.04- 0.08	-	-	-	0.1	0.4
Gr.23	0.08	0.13	0.03	0.125	0.25	5.5- 6.5	3.5- 4.5		-	-	-	0.1	0.1

In order to avoid the titanium disc has any collision in transit or damage, usually wrapped with pearl cotton (expandable polyethylene), then packed into wooden case.

Material	CP titanium,Titanium alloy
Grade	Gr1, Gr2, Gr4, Gr5, Gr7, Gr9, Gr11, Gr12, Gr16, Gr23 etc
Size	Thickness： 0.1～2mm, Width： 10～500mm, L： ≥500mm
Standard	ASTM B265, AMS 4911, AMS 4902, ASTM F67, ASTM F136 etc
Status	Hot Rolled (R), Cold Rolled (Y), Annealed (M), Solution treatment (ST)

Grade	Mechanical Properties
	Tensile Strength Min		Yield Strength (0.2% offset)				Elongation in50mm Min(%)	Bend Test
	Ksi	MPa	Min		Max			﹤1.8mm thickness	1.8-4.57mm thickness
	Ksi	MPa	Ksi	MPa	Ksi	MPa		﹤1.8mm thickness	1.8-4.57mm thickness
Gr.1	35	240	20	138	45	310	24	1.5T	2T
Gr.2	50	345	40	275	65	450	20	2T	2.5T
Gr.4	80	550	70	483	95	655	15	2.5T	3T
Gr.5	130	895	120	828	-	-	10	4.5T	5T
Gr.7	50	345	40	275	65	450	20	2T	2.5T
Gr.9	90	620	70	483	-	-	15	2.5T	3T
Gr.11	35	240	20	138	45	310	24	1.5T	2T
Gr.12	70	483	50	345	-	-	18	2T	2.5T
Gr.16	50	345	40	275	65	450	20	2T	2.5T
Gr.23	120	828	110	759	-	-	10	4.5T	5T

Titanium strip

Products Details

Featured Products

Contact us