Titanium Wire Manufacturer: Top Quality & Competitive Prices

Titanium wire

We use semi-finished titanium bar to manufacture titanium wires. Put the titanium bar into the mold to process, due to the pulling effect, the titanium bar deforms under high temperature when through the hole of the mould. The cross section is reduced, and the length increased. Stretching in a heated state helps to eliminate the internal stress and improve the plasticity of titanium wires. It effectively improves the precision of the titanium wire, and the surface finish, which can achieve a better comprehensive performance.

Grade	Condition	Specification
Gr1, Gr2, Gr4, Gr5, Gr7, Gr9, Gr11,Gr12, Gr16, Gr23	Hot Rolled(R)Cold Rolled(Y)Annealed(M)Solution treatment(ST)	Ф0.1-Ф7.0

Chemical composition test Physical properties test Appearance defects inspection Flattening test Flaring test Hydrostatic test Air tightness test Ultrasonic flaw detection Eddy current testing

Grade	Chemical composition, weight percent (%)
	C≤	O≤	N≤	H≤	Fe≤	Al	V	Pb	Ru	Ni	Mo	OtherMax each	OtherMax total
Gr.1	0.08	0.18	0.03	0.015	0.20	-	-	-	-	-	-	0.1	0.4
Gr.2	0.08	0.25	0.03	0.015	0.30	-	-	-	-	-	-	0.1	0.4
Gr.4	0.08	0.25	0.03	0.015	0.30	-	-	-	-	-	-	0.1	0.4
Gr.5	0.08	0.20	0.05	0.015	0.40	5.5-6.75	3.5-4.5	-	-		-	0.1	0.4
Gr.7	0.08	0.25	0.03	0.015	0.30	-	-	0.12-0.25	-	0.12-0.25	-	0.1	0.4
Gr.9	0.08	0.15	0.03	0.015	0.25	2.5- 3.5	2.0- 3.0	-	-	-	-	0.1	0.4
Gr.11	0.08	0.18	0.03	0.15	0.2	-	-	0.12-0.25	-	-	-	0.1	0.4
Gr.12	0.08	0.25	0.03	0.15	0.3	-	-	-	-	0.6- 0.9	0.2-0.4	0.1	0.4
Gr.16	0.08	0.25	0.03	0.15	0.3	-	-	0.04- 0.08	-	-	-	0.1	0.4
Gr.23	0.08	0.13	0.03	0.125	0.25	5.5- 6.5	3.5- 4.5		-	-	-	0.1	0.1

In order to avoid the titanium disc has any collision in transit or damage, usually wrapped with pearl cotton (expandable polyethylene), then packed into wooden case.The titanium wire is usually used for welding, frames, surgical implants, decoration, electroplating hanging fixture.

Grade	Mechanical Properties
	Tensile Strength Min		Yield Strength (0.2% offset)				Elongation in 50mm Min(%)
	Ksi	MPa	Min		Max
			Ksi	MPa	Ksi	MPa
Gr.1	35	240	20	138	45	310	24
Gr.2	50	345	40	275	65	450	20
Gr.4	80	550	70	483	95	655	15
Gr.5	130	895	120	828	-	-	10
Gr.7	50	345	40	275	65	450	20
Gr.9	90	620	70	483	-	-	15
Gr.11	35	240	20	138	45	310	24
Gr.12	70	483	50	345	-	-	18
Gr.16	50	345	40	275	65	450	20
Gr.23	120	828	110	759	-	-	10

Material	CP titanium, titanium alloy
Grade	Gr1, Gr2, Gr4, Gr5, Gr7, Gr9, Gr11, Gr12, Gr16, Gr23 etc
Size	Diameter： 0.1～7mm * L
Standard	ASTM B863, AWS A5.16, ASTM F67, ASTM F136 etc
Shape	Straight, Coil
Status	Annealed (M)
Technology	Hot rolling, Stretching
Surface	Pickled, Polished

Diameter	Tolerance
Ф0.1-Ф0.2	±0.025
Ф0.2-Ф0.5	±0.04
Ф0.5-Ф1.0	±0.06
Ф1.0-Ф2.0	±0.08
Ф2.0-Ф4.0	±0.10
Ф4.0-Ф7.0	±0.14

Titanium wire

Products Details

Featured Products

Contact us